The JMS 1550 was designed by Richard Jerkins, a licensed embalmer with over 30 years in the prep room, and it is built new at our shop in Castlewood, Virginia. It is made for control: lower pressures and a lower rate of flow for good distribution with less swelling, and gauges that show you exactly what you are injecting.
Control
- 50 PSI maximum. More control through the lower pressures, with less swelling.
- Lower rate of flow for more control and less swelling.
- Liquid-filled pressure gauge. No shaking needle, and a detailed readout.
- Rate-of-flow sight gauge. See exactly how much you are injecting as it happens, instead of watching the tank and guessing.
Built to protect itself
- Automatic pump shutoff when the tank runs empty, so the pump never runs dry.
- Direct-drive pump. No belts, no pulleys. Smooth and quiet.
- Built-in electric internal fluid shutoff, so nothing gravity-drains from the tank when the machine is off. Off is off, Mix is only mix, and Inject sends fluid to the deceased while the sight glass shows the rate.
- Red light for mix, green light for inject.
Construction
- 2-gallon glass tank and plumbing.
- Stainless steel base.
- Brass plumbing fittings.
- Chemical-resistant hard tubing and lines.
- Hose barb main fitting, so you can use standard, low-cost tubing.
- Relaxed clear silicone hose included.
- Not rated for phenol or cavity fluid.
Price and shipping
- $2,900 plus sales tax where it applies, delivered to your door. Shipping anywhere in the USA is included.
- No card fees.
- International shipping is available at extra cost.
Service
References are available from funeral homes using our machines in the USA, Mexico and Puerto Rico. You get information and service before, during and after the sale.
Sold to licensed funeral professionals only. Questions before you buy? Call or text Richard at 336-380-3088, or call the office at 276-738-1008.
